Start here

Is it the panels, the inverter or the utility? A 5-minute check

Before you call anyone, five minutes from the ground can usually tell you which part of the system has the problem. None of these checks needs a ladder or a tool.

5 min readUpdated November 2026From the Energy Solution Providers service team

The short answer

Look at the inverter light first. If it is off, check the solar breaker. If it is green but the app says zero, the problem is usually the internet connection, not the panels.

Before you start

Check that it is daytime with decent sun. A solar system makes nothing at night and very little under heavy monsoon cloud, so an evening check will always look like a fault. Mid-morning to mid-afternoon on a clear day is best.

Stay off the roof. Everything below is done from the ground, at the inverter, at the electrical panel and on your phone. If you see smoke, smell burning or hear crackling, turn off the solar breaker if it is safe to reach and call us. If there is fire, call 911.

The 5-minute check

  1. Is the house power on?If your home has no power, the solar will be off too. Grid-tied solar is required to shut down in a power cut, so this is normal. See why solar turns off in an outage.
  2. Look at the inverterThe inverter is usually on a garage wall or beside the electric meter. Enphase and APsystems systems have small inverters under each panel instead, plus a gateway box indoors or by the meter. Note the color of each light, and take a photo of any screen.
  3. If the inverter is dark, check the breakersFind the breaker labelled solar, PV or inverter in your main electrical panel, and the AC disconnect switch near the meter. If one is off or tripped, reset it once. If it trips again, leave it off: see breaker keeps tripping.
  4. If the inverter looks normal, check the appA green light at the inverter but zero in the app usually means the system is working and the internet link is not. Did your router, internet provider or Wi-Fi password change? See reconnect your monitoring.
  5. If there is a red or amber light, read the messageWrite down the exact code or message and the time. Our guides for SolarEdge, Enphase, SMA and Fronius explain the common ones.
  6. Compare with last yearIf the system is running but making less, compare this month with the same month last year in the app. Use our production checker to see a normal range for your system size.

What your answers point to

What you foundMost likelyNext step
Inverter dark, breaker trippedA breaker fault, heat-worn breaker, or a fault that made it tripReset once. If it trips again, call.
Inverter dark, breakers fineFailed inverter, or a wiring fault before itBook a service call.
Green light, app shows zero or offlineInternet or gateway connectionReconnect the monitoring.
Red or amber light, or an error codeDepends on the code: grid, wiring or the inverter itselfPhotograph the screen and look it up, or send it to us.
Running, but one section reads lowOne panel, optimizer or microinverter, or new shadeCheck the panel view in the app, then call.
Running, everything a bit lowDust, heat, or an aging inverterSee cleaning and heat.
Production normal, bill went upUsage, rate plan or export credits, not the solarSee why the bill went up.

Where to find each part

  • Inverter: a box about the size of a small suitcase, usually on the garage wall, an outside wall near the meter, or on the side of the house. It has a label with the brand.
  • Solar breaker: in your main electrical panel, often at the bottom of the row, labelled solar, PV or inverter. On some homes it is in a separate small panel next to the meter.
  • AC disconnect: a gray box with a handle, usually within sight of the utility meter. Arizona utilities usually require one on solar homes.
  • Rapid shutdown switch: newer systems have one near the meter, often with a red label. Switching it off stops the system and lowers the voltage on the roof wiring.
  • Gateway or monitoring box: on Enphase, SolarEdge with a separate gateway, Tesla and others, a smaller box that links the system to your internet.

Tip. Take a photo of each of these on a day when everything is working. If something changes later, you have a picture of what normal looks like.

Questions people ask

Can I check the panels on the roof myself?

Please do not climb up. Look from the ground or an upstairs window for broken glass, loose wires or debris. Everything else on this page can be checked from the ground.

What should I have ready when I call?

The brand of the inverter, a photo of its screen or lights, the date production stopped (the app shows it), and whether anything changed around that time: a storm, a power cut, new internet or a roof job.

This guide is general advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.

Accredited, award-winning and Arizona licensed

AriSEIA member — Arizona Solar Energy Industries AssociationHomeAdvisor Top RatedHomeAdvisor Elite Service awardBetter Business Bureau accredited business, A+ ratingSolarReviews — read our customer reviewsAngi Super Service Award 2023Angi Super Service Award 2022
Call us Text Get a free quote

Type at least two letters.