The short answer
Compare a whole month with the same month last year, not one day with another. In central and southern Arizona, a well-placed system makes roughly 1,600 to 1,800 kWh a year for each kW of panels.
kW and kWh: the two numbers in your app
- kW (kilowatts) is power right now. Like the speed on a car's dashboard. It rises in the morning, peaks around midday and falls in the afternoon.
- kWh (kilowatt-hours) is energy over time. Like the miles driven. This is what your utility bills you for, and what to compare.
Your system size is in kW too: the most the panels could make in ideal lab conditions. A real system on a hot Arizona roof rarely shows its full size as power, and that is normal.
Production checker
Enter your system size and pick a month to see what a healthy system usually makes in central and southern Arizona.
A healthy system usually makes
–
Based on typical output for a well-placed, unshaded system in the Phoenix and Tucson areas, about 1,700 kWh a year per kW. Shade, dust, panel age and roof pitch all move the number. Treat it as a guide, not a guarantee.
What a normal Arizona year looks like
A healthy system here follows the same shape every year:
- Best months: April, May and June. Long days, high sun and cooler panels than in midsummer.
- July and August dip. Monsoon clouds and heat cut output, even though the days are long. See solar in the heat.
- Lowest months: December and January. Short days and a low sun. Often a little over half of what May makes.
How to compare properly
- Use whole months, not single daysOne cloudy day can halve the output. Over a month, weather mostly evens out.
- Compare with the same month last yearMost apps let you switch to a monthly or yearly view. A month that is down more than about 15% on the same month last year is worth a look.
- Look at the panel view if you have oneEnphase, SolarEdge and other panel-level systems show each panel. At midday, panels on the same roof face should read close to each other. One low or zero panel points to that panel's microinverter or optimizer.
- Check the production curve on a clear dayA healthy day looks like a smooth hill. Flat tops at midday mean the inverter is at its limit or derating in heat. Sudden drops to zero mean it is shutting off, often a grid voltage fault.
Tip. Panels lose a little output each year as they age, usually about half a percent. A drop much bigger than that, or a sudden one, is not aging. It is a fault.
Questions people ask
Where do I find my system size?
It is on your contract or permit paperwork, usually written as kW or kW DC. You can also count the panels and multiply by the watts on the panel label: 20 panels of 400 watts is 8 kW.
My system makes less than the checker says. Should I worry?
Not straight away. East or west roofs, shade and older panels all make less. If you are well below the range for two months in a row, or well below the same month last year, it is worth a check.
This guide is general advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






