The short answer
All green is good. Amber on the network light means no internet. Amber on production means some microinverters are not producing. Off at night is normal for the production light.
How an Enphase system is set up
Instead of one big inverter on the wall, Enphase puts a microinverter under every panel. Each one reports to a gateway: the Envoy (Envoy-S on systems from about 2015) or the newer IQ Gateway. The gateway is usually in a gray box near your electric panel, sometimes inside an Enphase IQ Combiner. It sends data to the Enphase app over your internet.
So when something looks wrong in the app, there are three places it can be: one or more microinverters, the gateway, or your internet.
The four lights on the gateway
The Envoy-S and IQ Gateway have four lights in a row on the front. From left to right on most units they are: network, AP mode, power production and microinverter communication. A small icon beside each one tells you which is which.
Network light (the cloud or globe icon)
- Solid greenConnected to Enphase. The app is getting data.
- Flashing greenConnecting. Give it a few minutes.
- Solid amberConnected to your home network but not reaching the internet. Check your router, or whether the internet is down.
- OffNo network at all. The Wi-Fi details changed, the network cable is unplugged, or an old cellular modem stopped working. See reconnecting your monitoring.
AP mode light (the Wi-Fi icon)
- Solid greenThe gateway is running its own small Wi-Fi network for setup. You turn this on with the AP mode button when reconnecting it.
- OffNormal. AP mode turns itself off after a while.
Power production light (the lightning icon)
- Solid greenAll the microinverters are producing.
- Flashing greenA software update is running. Leave it alone.
- Solid amberOne or more microinverters are not producing. During the day, check the app to see which panels.
- OffNothing is producing. Normal at night. During a sunny day, check the solar breaker.
Microinverter communication light (the arrows icon)
- Solid greenThe gateway is hearing from all the microinverters.
- Flashing greenIt is scanning for devices, usually after setup or a restart.
- Solid amberSome microinverters are not talking to the gateway. Normal at night (they sleep). During the day it points to failed units or a wiring fault.
- OffIt cannot hear any microinverters. During the day, the solar breaker may be off.
Tip. At night, amber or off lights for production and microinverter communication are normal. Check the lights between about 10am and 3pm on a clear day.
Common combinations
| What you see | What it means |
|---|---|
| All four green (AP off) | Everything is fine. |
| Network off or amber, others green | The panels are producing. Only the internet link is down. |
| Production and communication amber in daytime | Some microinverters have dropped out. Check the app for grey or zero panels. |
| Production and communication off in daytime | The microinverters have no power. Check the solar breaker. |
| No lights at all | The gateway itself has no power. Check its breaker (often a small one in the combiner box). |
What the Enphase app shows
- A panel at zero, or grey, for days: that microinverter has likely failed or lost its connection. Many Enphase microinverters carry a 25-year warranty, so the part is often covered and you pay for the labor.
- Several panels on one branch at zero: a wiring fault, or a tripped breaker for that branch.
- "Not reporting" for the whole system: the gateway lost its internet link. The panels may still be producing: check the production light.
Older systems with a cellular modem
Many Enphase systems from the 2010s reported over a cellular modem rather than home Wi-Fi. The 3G networks they used were switched off in 2022, so those systems went quiet. The fix is to connect the gateway to your home internet with Wi-Fi or an Ethernet cable, or to fit a current Enphase modem.
Questions people ask
The app shows some panels grey. What does that mean?
Grey usually means the gateway has not heard from those microinverters. If it is one or two panels and it lasts more than a day or two, those microinverters may have failed.
My Envoy used a cellular modem and stopped reporting. Why?
Many older Enphase systems reported over 3G cellular networks, which were shut down in 2022. The fix is to connect the gateway to your home internet, or fit a current modem.
This guide is general advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






