The short answer
Reset it once. If it trips again, leave it off and call. Common causes in Arizona are a breaker worn out by years of heat, a loose connection, a ground fault in the wiring or a failing inverter.
Resetting it once is fine
- Turn the inverter off firstIf you have a string inverter with a switch, turn it to OFF or 0. This stops the system pushing power through the breaker while you reset it.
- Reset the breakerA tripped breaker often sits in the middle. Push it firmly all the way to OFF, then back to ON.
- Turn the inverter back on and waitThe inverter waits about five minutes before it produces. Watch for the breaker tripping when it starts, or around midday when output peaks.
- If it trips again, leave it offA breaker that trips twice is protecting your home from a real problem. Leave it off and call us.
Never tape, hold or force a breaker on. If a breaker or the panel around it is hot, discolored, buzzing or smells of burning, leave everything off and call us. If there is smoke or fire, call 911.
When it trips tells you a lot
| When it trips | Likely cause |
|---|---|
| Around midday on hot, sunny days | The breaker is running near its limit and the heat pushes it over. Breakers wear out, and Arizona garages and outdoor panels get very hot. It may also be undersized for the system. |
| Right when the inverter starts | A fault in the inverter, or a short in the wiring between the inverter and the panel. |
| After rain or on damp mornings | Water in a connector or a damaged cable causing a ground fault. |
| At random times | A loose connection that heats up, or a breaker that is simply worn out. |
| During a storm or power cut | A surge. One trip after a storm is common. If it keeps tripping afterwards, the storm may have damaged something. |
What we check
- The breaker itself: its rating, its age, and whether it is the right type for your electrical panel.
- The connections at the breaker, the AC disconnect and the inverter, which can loosen and heat up over years of hot and cold.
- The wiring between the inverter and the panel, for damage or a ground fault.
- The inverter's own error log, which often records what happened at the moment it tripped.
- How hot the panel gets. Sometimes the fix is as simple as a new breaker. Sometimes it is a shade cover or moving equipment out of the afternoon sun.
Why this is not a DIY job
Swapping a breaker means opening the electrical panel, which stays live even with the main breaker off. Getting the size or type wrong can let wiring overheat. Most breaker fixes are quick and inexpensive for a licensed electrician, and a service call starts from $150.
Questions people ask
Can I just put in a bigger breaker?
No. The breaker is sized to protect the wiring and to meet the electrical code for your panel. A bigger one can let wires overheat. Any change has to be worked out by an electrician.
The breaker feels warm. Is that normal?
Slightly warm can be normal on a hot day with the system running hard. Hot to the touch, discolored, or with a burning smell is not. Turn the system off and call us.
This guide is general advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






