The short answer
Check production first: if this month is well below the same month last year, the system needs a look. If production is normal, the cause is usually more air conditioning, a rate change, or exports credited at less than you pay for power.
Step one: is the system producing normally?
Open your monitoring app and compare this billing month with the same month last year. Use our production checker if you do not have last year's numbers.
- Production is well down, or the app stopped updating: the solar is the likely cause. See why production drops and monitoring offline.
- Production is normal: the solar is doing its job, and the reason is on the bill. Read on.
How to read a solar bill
With solar, your meter counts power in both directions. APS, SRP and TEP bills show two numbers each month, though the wording differs:
| On the bill | What it means |
|---|---|
| Delivered, or received from the utility | What you bought from the grid: mostly at night and when the house used more than the panels made. |
| Received from you, exported, or sent to the grid | The extra solar your home did not use, sent to the grid and credited to you. |
| Not on the bill at all | The solar you used in the house as it was made. This is usually the biggest saving, and only the app shows it. |
The usual reasons, when production is normal
1. You used more power
Summer cooling is by far the biggest one. Air conditioning running through hot nights uses grid power after the sun goes down. A new pool pump, an electric vehicle, a home office, guests, or an older AC unit losing efficiency all add up. Compare the delivered number with the same month last year.
2. Exports are credited at less than you pay
Most Arizona solar homes are no longer on one-for-one net metering. Since 2017, APS and TEP credit exported power at an export rate that is lower than the price you pay for grid power, and it steps down for new customers over time. The rate you got is usually locked for 10 years from when your system was connected. SRP has its own solar price plans with their own export credits. The result is the same: power you use as it is made is worth more than power you export.
3. A demand charge
Some plans, including SRP's Customer Generation plan, charge for your highest use in a short window during on-peak hours, as well as for the energy. Running the AC, the dryer, the oven and an EV charger at the same time on a summer evening can set a high demand charge for the whole month, whatever the solar made. Spreading big loads outside peak hours keeps it down.
4. The rates or the plan changed
Utilities change their prices from time to time, and on-peak hours and prices differ between summer and winter. Check that you are still on the plan you expect: a move, a meter change or a new account can put a home on a different plan.
5. Seasonal timing
Solar makes the most in spring, and you use the most in summer. A June bill can look fine and an August bill much worse with nothing wrong. See solar in the heat.
What helps
- Use more power while the sun is up. Pre-cool the house in the afternoon, and run the pool pump, dishwasher and laundry in the daytime.
- Check the rate plan. APS and SRP both have tools that compare plans on your actual use. Our guides to the APS solar rate plans and SRP solar rate plans explain the options.
- Consider a battery. Storing midday solar for the evening peak helps most on plans with low export credits or demand charges.
- Keep the system healthy. A yearly check and cleaning catches problems early. See the Solar Care Plan.
Tip. Send us your last two bills and a screenshot of your app, and we will tell you whether the solar is the problem.
Questions people ask
Which part of the bill shows my solar?
Look for energy delivered (what you took from the grid) and energy received (what you sent back). The solar you used in the house yourself never shows on the bill, so the app is the only place you see total production.
Should I change my rate plan?
Possibly. The best plan depends on when you use power and whether you have a battery. Your utility can compare plans on your actual usage, and we are happy to look at it with you.
This guide is general advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






