The short answer
Check the inverter or gateway light first. If it shows normal production, only the internet link is down, and it is usually a router or Wi-Fi password change. If the lights are off or red, the system may have stopped too.
What you may notice
- The app shows "offline" or the last update was days ago
- You changed your internet provider, router or Wi-Fi password
- Your system used a cellular connection and simply stopped
- Production data has gaps
Usual causes
- A new router or Wi-Fi passwordThe most common cause by far. Solar devices remember the old network name and password, and many only connect on 2.4 GHz Wi-Fi.
- A failed communication gatewayThe Envoy, ECU, PVS box or communication card can fail, especially after a lightning storm or surge.
- An old cellular modemMany systems from before about 2018 reported over 2G or 3G networks, which were switched off by 2022.
- A failed inverterSometimes the inverter has stopped altogether and the app simply has nothing to show.
What you can safely check
- Look at the inverter or gateway lightsA normal green production light means the panels are working. See the guides for Enphase and SolarEdge.
- Think back to when it stoppedThe app shows the last report. Did the internet provider, router or Wi-Fi password change around then?
- Try the old Wi-Fi name and passwordSetting the new router to the old network name and password lets most devices reconnect on their own. Full steps: reconnect your monitoring.
- Check your billIf the bill jumped at the same time the app went quiet, the system may have stopped producing too.
Why it is worth fixing
Monitoring is your early warning. Without it, a failed inverter or a tripped breaker can go unnoticed for months, and the first sign is a high summer bill. A working app shows a problem the next day.
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We reconnect the monitoring or upgrade the communications, and check the system is actually producing.
Many older systems reported over cellular networks that have since been shut down, and many more lose their connection when a router is replaced. We reconnect or upgrade the communications and confirm the system is actually producing.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
Most calls are about $300. Small fixes are often done on the spot. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
Are my panels still working if the app is offline?
Often, yes. Check that the inverter has a normal light, and look at your bill. If the bill has gone up, the system may have stopped too.
Can I reconnect it myself?
Sometimes, if it is just a Wi-Fi change and you still have the setup instructions. If the gateway or modem has failed, it needs a replacement part.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






