The short answer
Look at the gateway's four lights and the Enphase app's panel view. Grey or zero panels point to individual microinverters; amber on the network light means the internet link, not the panels. Many Enphase microinverters carry a 25-year warranty.
What you may notice
- One or more panels not reporting in the Enphase app
- The Envoy or IQ Gateway showing offline
- A whole branch of panels producing nothing
- An older M-series system with failing units
Usual causes
- One or more failed microinvertersEach panel has its own microinverter, so a failure takes out just that panel. It shows as a grey or zero panel in the app.
- The gateway lost its internet linkA new router, a changed Wi-Fi password, or an old cellular modem that stopped working. The panels keep producing.
- A tripped branch breakerLarger systems have several branches, each on its own breaker in the IQ Combiner. One tripped branch takes out a group of panels.
- Damaged trunk cable or connectorsThe cable that links the microinverters on the roof can be damaged by heat, critters or roof work.
What you can safely check
- Read the gateway lightsAll green is good. Full guide: Enphase Envoy and IQ Gateway lights.
- Use the app's array viewNote which panels are grey or zero, and since when. Several in a row on one branch point to wiring or a breaker.
- Check the breakersThe solar breaker in your main panel, and the breakers inside the Enphase combiner if you can open its outer door safely.
- Check after a router changeIf the whole system shows "not reporting", see reconnect your monitoring.
Enphase generations
| Model | Era | Notes |
|---|---|---|
| M190, M210, M215, M250 | Roughly 2009 to 2015 | Older units, reported through the original Envoy. Replacements are newer IQ models, which may need an updated gateway. |
| IQ6, IQ7 family | Roughly 2016 to 2021 | Very common in Arizona. Many have a 25-year warranty. |
| IQ8 family | 2021 on | Can run the home in daylight during an outage with an IQ System Controller (Sunlight Backup). |
Is one dead panel worth fixing?
One failed microinverter costs you one panel's output, roughly 1 to 2 kWh a day in Arizona. That is easy to live with for a while, but failures tend to add up, and a warranty replacement means you mostly pay for the labor. When several units have failed, replacing them in one visit saves money.
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We test panel by panel to find the weak spot, and clean the array if dirt is the problem.
Because each panel has its own microinverter, one failure only takes out one panel. That makes it easy to live with for a while, but it adds up. We replace failed units under the Enphase warranty where they are covered, which on many models runs 25 years, and get the gateway reporting again.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
From $150 to find the cause, then a clear price for the fix. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
Can you replace one microinverter?
Yes. We identify the failed unit from the app, replace it, and process the warranty claim with Enphase where it is covered.
My Envoy says offline. Are the panels still working?
Often they are, and it is only the reporting. We reconnect or replace the gateway and confirm every microinverter is producing.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






