The short answer
Take a photo of the light or code first. Grid voltage and frequency errors often clear on their own; ground, isolation and arc faults do not, and need finding before the system is safe to run.
What you may notice
- A red, orange or flashing light on the inverter
- An error code or "fault" on the screen
- The inverter turns on and off during the day
- A fan running loudly, or the unit very hot to the touch
Usual causes
- A ground or isolation faultElectricity is leaking from the panel wiring to ground: a damaged cable, water in a connector or chewed wiring. Often shows first on damp mornings and clears by midday, but it gets worse.
- Grid voltage out of rangeThe voltage at your home is too high or too low for the inverter. Common on sunny afternoons when many homes on the street export at once. Usually clears itself.
- An internal inverter failureA failed board, relay or capacitor inside the inverter. The fault comes back after every restart.
- A failed fan or overheatingInverters on west walls in summer run very hot. A failed fan or blocked vents makes them derate or shut down.
Look up your brand's codes
Each brand shows faults differently. Our guides explain the common lights and messages:
- SolarEdge lights and error messages
- Enphase Envoy and IQ Gateway lights
- SMA Sunny Boy lights and messages
- Fronius state codes
What you can safely check
- Photograph the screen or lightsWrite down the exact message or code, and the time. A screenshot of the app's alert is just as good.
- Check whether it is constant or comes and goesFaults that appear only on hot afternoons or damp mornings point to different causes than one that never clears.
- Restart onceFollow the safe order. If the same fault returns, leave it off and call.
- Do not keep resetting an arc faultAn arc fault means the inverter detected sparking in the DC wiring. The cause needs finding.
Repair or replace?
Many inverter faults are not the inverter at all: they are the grid, the wiring or a single part on the roof. When the inverter itself has failed, the choice depends on age and warranty:
| Situation | Usually the best option |
|---|---|
| Under manufacturer warranty | A warranty replacement. You pay for the labor; we handle the claim. |
| Out of warranty, under about 10 years old | A repair where the part is available, or a replacement if the repair costs most of a new unit. |
| Out of warranty, 12 years or older | A new inverter, matched to your array, with a fresh warranty and better monitoring. From about $2,000 installed. |
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We read the fault, fix the cause, and handle the warranty claim if it is covered. If an out-of-warranty inverter has died, we replace it.
Some faults clear themselves once the cause goes away, like a short grid voltage problem. Others, like a ground or isolation fault, need finding and fixing before the system is safe to run. If the inverter itself has failed and the warranty has run out, a modern replacement often brings better monitoring too.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
Depends on the size of the inverter being replaced. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
What should I tell you when I call?
The brand on the inverter, the code or a photo of the screen, roughly how old the system is, and whether the problem is constant or comes and goes.
Is it worth replacing an old inverter?
Usually, yes. Inverters wear out long before panels do, and a new one gets the whole array producing again. Replacements start at about $2,000 installed, depending on size.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






