The short answer
Photograph the STATE code on the screen. Codes in the 100s are usually the grid and clear on their own, 306 and 307 at dawn and dusk are normal, and codes in the 400s and above usually need a technician.
What you may notice
- A state code on the Fronius display
- The inverter not starting in the morning
- Monitoring (Solar.web) no longer updating
- Fan noise or the unit running hot
Usual causes
- Grid voltage too high (102)Common on sunny afternoons in Arizona neighborhoods with a lot of solar. It clears when the voltage settles.
- Not enough DC from the panels (306, 307)Normal at dawn and dusk. All day in full sun points to a DC switch, a string fault or damaged wiring.
- An internal fault (400s and up)A failed board or part inside the inverter.
- Lost monitoringThe Datamanager card lost its Wi-Fi after a router change, so Solar.web stops updating.
What you can safely check
- Read the codeFull guide: Fronius state codes explained.
- Note the time of dayA code that shows only at sunrise and sunset is normal start-up and shut-down.
- Check the DC switch and breakersThe DC switch on the inverter, the solar breaker and the AC disconnect.
- Restart onceFollow the safe order. If the code returns, call with the photo.
Fronius models we see
- IG Plus: an older line, many past warranty. When one fails, replacement is usually the better value.
- Galvo and Primo: very common on Arizona homes from the 2010s, with a Datamanager card for monitoring.
- Symo and Primo GEN24: newer models, some with battery support.
Fronius warranties depend on the model and on whether the inverter was registered. Send us the serial number and we will check.
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We read the fault, fix the cause, and handle the warranty claim if it is covered. If an out-of-warranty inverter has died, we replace it.
Some state codes point to the grid or the array rather than the inverter itself, so the fix is not always a new inverter. If the unit has failed out of warranty, we price a replacement matched to your system.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
Depends on the size of the inverter being replaced. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
My Fronius shows a state code. Is it serious?
It depends on the code. Some clear on their own; others mean a fault that needs fixing. Send us a photo of the display when you book.
Can you fix my Solar.web monitoring?
Usually. It is often the network connection or the data manager card, and we can reconnect or replace it.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






