The short answer
Compare this month with the same month last year, not one day with another. A drop of more than about 15% usually has a findable cause: dirt, new shade, one failed panel-level part, or an inverter that is wearing out.
What you may notice
- Production is down compared with the same month last year
- One section of panels reads lower than the rest in the app
- Bills creeping up with no change in how you use power
- Visible dust, bird droppings or new shade on the panels
Usual causes
- Dust and bird droppingsArizona dust builds up over dry months, and droppings block whole cells. See cleaning in Arizona.
- New shadeA tree that grew, a new building, or a satellite dish. Even partial shade on one panel can pull down the panels around it on a string system.
- A failed panel, optimizer or microinverterOn panel-level systems, one panel at zero in the app. On string systems, a whole string can drop.
- An inverter wearing outOlder inverters can derate more and more in the heat, or drop out during the day.
What you can safely check
- Compare month to monthUse the monthly or yearly view in your app. Or use our production checker to see a normal range for your size.
- Look at the panel viewOn Enphase, SolarEdge and other panel-level systems, panels on the same roof face should read close to each other at midday.
- Look at the daily curve on a clear dayA smooth hill is healthy. Sudden drops to zero mean the inverter is shutting off. A flat top at midday means it is at its limit or hot.
- Look from the groundDirt, droppings, leaves, and new shade from trees or buildings.
What is normal
- July and August dip. Heat and monsoon clouds cut output. See solar in the heat.
- Panels age slowly. About half a percent a year is normal. A sudden or large drop is not aging.
- Daily numbers jump around. One cloudy day can halve output. Over a month it evens out.
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We test panel by panel to find the weak spot, and clean the array if dirt is the problem.
Compare month to month, not day to day: Arizona summers and monsoon clouds make daily numbers jump around. If the same month is clearly down on last year, something has changed, and we can find out what.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
From $150 to find the cause, then a clear price for the fix. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
Will cleaning my panels fix it?
Sometimes. Dust and bird droppings do cut production in Arizona. If cleaning does not bring it back, the cause is more likely a failed panel, optimizer, microinverter or the inverter itself.
How much production loss is normal as panels age?
A small, slow decline each year is normal. A sudden or large drop is not, and is worth having checked.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






