The short answer
Start in the battery app: check the operating mode and the backup reserve. Most batteries that will not charge or did nothing in an outage come down to a setting, a lost connection to the gateway, or a tripped breaker, rather than a dead battery.
What you may notice
- The battery is stuck at 0% or 100% and never moves
- The power went out and the house went dark anyway
- The app shows the battery or gateway offline
- The battery drains much faster than it used to
Usual causes
- The mode or reserve changedSoftware updates and app changes can switch the battery to a different mode, or set the backup reserve to 0%, so there is nothing left for an outage.
- The gateway lost communicationThe backup gateway or switch talks to the battery and the meter. If it loses that link, the battery may stop charging or backing up.
- A tripped breakerA breaker between the battery and the inverter, or in the backup panel, can trip and isolate the battery.
- Backup wiring, or a failed moduleThe circuits you expected to keep may not be wired to the backup panel. Less often, a battery module has failed.
What you can safely check
- Open the battery appNote the operating mode (self-powered, time-based or backup only) and the backup reserve percentage.
- Look for offline alertsIf the battery or gateway shows offline, note when it started and whether your internet changed.
- Check the breakersIn the main panel and any backup panel, look for a tripped breaker labelled battery, ESS or backup.
- Watch a sunny dayA healthy battery charges from solar during the day. If it stays at the same percentage all day in sun, something is wrong.
Arizona heat and batteries
Batteries in direct afternoon sun or hot garages limit their charging to protect themselves, and age faster. If yours is on a west or south wall, a shade cover or a cooler spot can help. See solar in the heat.
Batteries we service
Tesla Powerwall (see Tesla service), Enphase IQ Battery, Generac PWRcell (see Generac service), Duracell Power Center, LG and others, whoever installed them.
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We check the settings, the gateway and the wiring between the battery, inverter and backup panel, test the battery itself, and run a real backup test so you know it will work in the next outage. If a module has failed, we handle the warranty claim.
Arizona summers are hard on batteries in garages and on west-facing walls. If yours is in direct afternoon sun, a shade cover or a better location can make it last longer, and we can tell you whether that is worth doing.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
Most calls are about $300. Small fixes are often done on the spot. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
Why did my house go dark in an outage when I have a battery?
Usually the battery is set to keep no reserve, it was empty, or only some circuits were wired for backup. Sometimes the backup switch or gateway has failed. A backup test shows which.
Do you work on batteries you did not install?
Yes. We service Tesla Powerwall, Enphase, Generac PWRcell, LG, SimpliPhi and other batteries, whoever installed them.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






