The short answer
Photograph the PWRcell inverter screen, including the status of each PV Link and the battery. Most shutdowns trace back to one part: a SnapRS device or PV Link on the roof, or a battery cabinet fault, and the screen points us to which.
What you may notice
- An error or fault message on the PWRcell inverter screen
- A PV Link or a whole string showing no power
- The battery cabinet not charging or not backing up
- The system shutting down and restarting during the day
Usual causes
- A failed SnapRS deviceThese small rapid shutdown devices sit under each panel. When one fails, it can stop the whole string. They are one of the most common causes of a PWRcell string going down.
- A PV Link that stoppedEach PV Link optimizes one string of panels. A failed PV Link shows no power for that string.
- A battery cabinet or module faultThe battery will not charge, will not discharge, or shows an error on the inverter screen.
- A communication faultThe inverter, PV Links and battery talk over a shared data line. A loose or damaged connection takes parts offline.
What you can safely check
- Read the inverter screenStep through the device list and note each PV Link's status and the battery state. Take photos.
- Check production by stringIn the PWRview app, a string at zero on a sunny day points to that string's PV Link or SnapRS devices.
- Check the breakersThe solar and battery breakers, and the PWRcell disconnect if fitted.
- Note restartsA system that shuts down and restarts during the day usually has one part dropping out.
Why roof parts matter on PWRcell
A PWRcell system has more parts on the roof than most: a SnapRS under every panel and, in many designs, several PV Links. Finding a failed one means testing string by string. We bring replacement parts, so most fixes are done in one visit, and we handle the Generac warranty claim where it is covered. If one string keeps failing, we will explain your options for replacing those parts.
Burning smell, smoke or sparks? If it is safe, turn off the solar breaker and the AC disconnect and keep clear. If there is fire, call 911. See how to shut down safely.
What we do
We test each string, PV Link and SnapRS device to find the one that failed, check the battery cabinet, and handle the Generac warranty claim where it is covered. If a whole string of rooftop parts keeps failing, we tell you your options for replacing them.
SnapRS devices and PV Links are on the roof, under the panels, so finding a failed one takes testing string by string. We bring replacements so most fixes are done in one visit.
- You call or book onlineTell us what the system is doing. Photos of the inverter screen or app help us bring the right parts.
- We find the causeA technician tests the system from the panels to the meter, so we fix the actual fault, not just the symptom.
- You get the price firstWe explain what failed and what it costs to fix before any work starts. Covered parts go through the manufacturer's warranty.
- We fix it and test itMost repairs are done in one visit. We confirm the system is producing and the monitoring is reporting before we leave.
What it costs
Most calls are about $300. Small fixes are often done on the spot. Service calls start from $150, and repairs can be financed.
See all repair prices →Questions people ask
My PWRcell keeps shutting down. Is that a SnapRS problem?
It is one of the most common causes, but a PV Link, a wiring fault or the inverter can do the same. Testing each string tells us which.
Is my Generac PWRcell still under warranty?
Many are. Send us the install date and a photo of the inverter label and we can check before the visit.
General advice for Arizona homeowners. Your equipment's manual has the final word, and anything inside the inverter, on the roof or in the electrical panel is a job for a licensed contractor.






