Case study Flagstaff, AZ
Flagstaff Residential Solar System
- 3.6 kW
- Grid-tied solar with passive solar heating
- Pitched roof, custom home

We installed a residential solar system for our client’s custom home in Flagstaff, Arizona with 3.6KW solar system and passive solar heating.
Results
Production is an estimate from the system size and typical Flagstaff sunshine. Real output depends on roof direction, tilt, shading and equipment age. A typical Arizona home uses about 12,600 kWh a year.
About this project
This custom home in Flagstaff was designed to use the sun two ways: a 3.6 kW solar electric system for electricity, and passive solar design for heat. Passive solar uses the home's orientation, south-facing windows and materials that store heat to warm the house during the day and release it at night, with no moving parts.
Because the home needs less energy to begin with, a smaller solar electric system covers a larger share of its use. That is the most cost-effective order for any project: reduce what the house needs, then size the solar to what is left.
System details
- Location
- Flagstaff, Arizona
- System size
- 3.6 kW
- System type
- Grid-tied solar with passive solar heating
- Roof and mounting
- Pitched roof, custom home
- Equipment
- Passive solar heating design
- Utility
- APS
- Estimated production
- 5,000–6,500 kWh a year
Going solar in Flagstaff
At about 7,000 feet, Flagstaff gets cold winters and real snow, which changes how a solar system is designed. Panels actually produce more per hour in cool, clear mountain air than in desert heat, but racking must handle snow loads and arrays are usually set at a steeper angle so snow slides off and the low winter sun is captured. Heating, not cooling, drives many Flagstaff energy bills, which is why passive solar design, like this home's, pairs so well with solar electric panels. Flagstaff is served by APS.






